Mounting Bracket (Intermediate) - Omron F3S-B Series Instruction Manual

F3S-B

2-2-4 Mounting Bracket (Intermediate)

Only supplied with types which have a protective height of 1050 mm or longer.
Configuration of U-shaped Intermediate Bracket Mounted at 90 Degree Angle
How to use
1. Assembly
Choose the mounting direction for the L- and U-
shaped intermediate bracket combination based on
the mounting direction (side or rear) and temporarily
secure the brackets with the M4 x 10 screw.
2. Installation
Clasp the center of the case with the U-shaped
bracket and temporarily secure the bracket to the
F3S-B with the M6 x 8 screw. The mounting bracket
(intermediate) for the emitter is oriented upside down
when compared to the bracket of the receiver.
26
MOUNTING SCREW FOR SENSOR (M6x8)
L-SHAPED INTERMEDIATE BRACKET
FLAT INTERMEDIATE BRACKET
RUBBER
U-SHAPED INTERMEDIATE BRACKET
FIXING SCREW FOR BRACKET (M4x10)
L-shaped intermediate bracket
U-shaped intermediate bracket
Side mounting
Rear mounting
U-shaped intermediate bracket
Unit: mm
Case