Indicators - Omron F3S-B Series Instruction Manual

Type F3S-B
Stand-alone
Item
Degree of
IEC60529 IP65
protection
Vibration Normal operation : 10 to 55 Hz, double-amplitude: 0.7mm, X, Y and Z directions
resistance
Shock resistance Normal operation : 100 m/s
Case: Aluminum
Materials
Front cover: PMMA (acrylic resin)
End caps: PA6
Size
30 x 40 mm
(cross section)
Test rod (*3), mounting brackets (top and bottom), mounting brackets (intermedi-
Accessories
ate) (*4), mounting plates (*4), Instruction manual(*5)
Applicable IEC(EN)61496-1 TYPE 2 ESPE (Electro-Sensitive Protective Equipment)
standard IEC 61496-2 TYPE 2 AOPD (Active Opto-electronic Protective Devices)
*1 For detailed type names and optical specifications, see "1-9 Table of Types".
*2 Nominal value (Set time). The accuracy is – 0 / + 70% of ON to OFF response time.
*3 Only with F3S-B
*4 For the 1,050 mm protective height and longer types.
*5 Only with F3S-B

1-8 Indicators

<Emitter Indicators>
POWER
INTER-
LOCK
EXT.TEST/
BLANKING
Emitter IR-power indicator
Interlock indicator
External test/ blanking indicator
Receiver ON-state indicator
OFF-state indicator
Instability indicator
P (*1)
20 sweeps
2P and BM 2P .
P and BM P .
Optical-axis line mark
IR-power indicator
(Orange)
Interlock indicator
(Yellow)
External test /
blanking indicator
(Green)
F3S-BM P (*1)
Master unit for series
connection
2
[10 G], X, Y and Z directions: 1000 times
<Receiver Indicators>
ON
OFF
UNSTAB
: Lit when emitting.
: Lit during start/restart interlock and start interlock.
: Lit during external test. / Flashing when using blanking
function.
: Lit when receiving light.
: Lit with interrupted light.
Flashing during connection with F39-E1 or with failure.
: Lit with an insufficient light reception or failure.
Flashing during connection with F39-E1.
F3S-B
F3S-BS (*1)
Slave unit for series
connection
ON-state indicator
(Green)
OFF-state indicator
(Red)
Instability indicator
(Orange)
13