Omron F3C-AL Datasheet page 3

Rating/Performance
Item Model
Sensing
Setting distance range
Black-/white-error
Spot Diameter
Light source
Power supply voltage
Current consumption
Control output
Protective circuits
Response time
Sensitivity adjustment
Ambient illuminance
Ambient temperature
Ambient humidity
Insulation resistance
Vibration resistance
Shock resistance
Protective structure
Connection method
Weight (packed state)
Case
Material
Lens
Accessories
F3C-AL
F3C-AL14-M1J
120 to 700 mm (White paper 100 x 100 mm) (Setting distance 700 mm)
170 to 700 mm (White paper, 90% remission, 100 x 100 mm)
170 to 560 mm (White paper, 6% remission, 100 x 100 mm)
20% max. (of setting distance, 90%/6% remission)
1.5 x 4 mm (Setting distance 700 mm)
Pulsed red light semiconductor laser
Class II: < 1mWeff. / 670 nm / 5% duty cycle
(Impulse time 60 µs, Period time: 1.2 ms)
10 to 30 VDC [ripple (p-p) 10% included]
30 mA max.
Load supply voltage 30 VDC max., load
current 150 mA max. (residual voltage: 2 V max.)
NPN open collector output type, Light-ON/Dark-ON
cable connection selectable
Reverse polarity protection, output short-circuit protection, mutual interference prevention
Operation and reset: 10 ms max.
6-turn adjuster
Incandescent lamp/Sunlight: 5,000 lux max.
Operating: 0°C to 50°C, Storage: -25°C to 60°C (with no icing or condensation)
Operating/Storage: 35% to 85%RH (with no condensation)
20 M min. at 500 VDC
10 to 55 Hz double amplitude 1.5 mm or 300 m/s
2
Destruction: 500 m/s for 3 times each in X, Y, and Z directions
IEC Standard IP40
M12 connector joint type (standard cable length 200 mm) / 4 x 0.34 mm² (PVC)
Approx. 80 g
ABS
Acrylics (PMMA)
Adjusting screwdriver, Laser warning label, instruction manual
F3C-AL44-M1J
Load supply voltage 30 VDC max., load
current 150 mA max. (residual voltage: 2 V max.)
PNP open collector output type, Light-ON/Dark-ON
cable connection selectable
2
for 2 h in each of X, Y, Z directions
A-179