Omron EJ1 - 07-2008 Operation Manual page 111

Operations from the Edit Device Parameters Window
1,2,3...
1,2,3...
92
2. The window for sending operation commands to the specified Temperature
Controller will be displayed.
3. Select the Tab Page for the channel that will be sent the command, and
click the button of the operation to be executed.
Note The message monitor timer must be changed to initialize settings.
For details, refer to page 107.
4. After the operation command is executed, click the Close Button.
The display will return to the Edit Device Parameters Window for the De-
viceNet Communications Unit.
Note Use the following procedure to change a manual manipulated variable.
1. Click the Manual Button.
2. Change the manipulated variable in the Edit Unit Parameters Window, and
click the Download can be changed during operation Button.
Note Use the following procedure to initialize the Temperature Controller.
1. Click the Parameter Initialization Button and then the Save RAM Data 2
Button.
2. Click the Reset Button in the Edit Device Parameters Window.
Section 5-2