Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fintek OSLO 4.0
Summary of Contents for Fintek OSLO 4.0
- Page 1 Models OSLO 4.0 - 5.0 R32-R410A Models OSLO 4.0 - 5.0 R32-R410A OSLO DCI 4.0 - 5.0 R 290 OSLO DCI 4.0 - 5.0 R 290 WATER CONDENSATED WATER CONDENSATED INSTALLATION, USE AND MAINTENANCE MANUAL INSTALLATION, USE AND MAINTENANCE MANUAL...
- Page 2 First of all, we would like to thank you for having decided to give your preference to an appliance produced by us. As you can see, you have made a winning choice as you have purchased a product that represents the state of the art in domestic air conditioning technology. By implementing the suggestions contained in this manual, thanks to the product you have purchased, you will be able to enjoy optimal environmental conditions without problems with a lower investment in energy terms.
-
Page 3: Table Of Contents
General Warnings general............. . Rules fundamentals Of safety. -
Page 4: Warnings General
GENERAL Warnings general After removing the packaging, ensure the integrity and A temperature that is too low or too high is harmful to health and constitutes a useless waste of energy. completeness of the contents. In case of non- compliance, contact the Agency that sold the device. Avoid direct contact with the air flow for a prolonged period. -
Page 5: Description
Description of the air conditioners monobloc to installation fixed. With air conditioner “ monobloc condensed waterfall" Easy installation can to be installed on any wall in we have conceived a new solution That represents a high or in Bass. All How much it is necessary to significant step forward in further reducing the aesthetic installation (template Of assembly, bracket of impact of air conditioners. -
Page 6: Dimensions And Weights In Transport
GENERAL Handling The unit he comes packaged individually in packaging Of cardboard. The packaging can to be transported, For The weight of the appliance And unbalanced towards single units, manually by two workers, or loaded onto a The right side (compressor side). transport trolley, even stacked for a maximum number of three packs. -
Page 7: Elements Unit
Elements unit Elementi unità air outlet flap Electrostatic air filter to be replaced every season Filtro aria elettrostatico da sostituire ogni stagione Flap uscita aria Touch screen displays Anti-lifting bracket Display touch-screen Staffa antisollevamento Front panel Ambient air probe Pannello frontale Sonda aria ambiente Water inlet (F 1/2”) Electrical power supply terminal block... - Page 8 ATTENTION! • Never seal the room - where this device will be used - completely airtight. This will prevent under pressure in this room. Under pressure can disrupt the safe operation of geysers, ventilation systems, ovens, etc. • Failing to follow the instructions may lead to nullification of the guarantee on this device.
- Page 9 the refrigerant caused by electric heaters, stoves, or other sources of ignition. • The appliance must be stored in such a way as to prevent mechanical failure. • Individuals who operate or work on the refrigerant circuit must have the appro- priate certification issued by an accredited organization that ensures competence in handling refrigerants according to a specif-...
- Page 10 1.2 Work procedure Work shall be undertaken under a controlled procedure so as to minimise the risk of a flammable gas or vapour being present while the work is being performed. 1.3 General work area All maintenance staff and others working in the local area shall be instructed on the nature of work being carried out.
- Page 11 • if an indirect refrigerating circuit is being used, the secondary circuit shall be checked for the presence of refrigerant; • marking to the equipment continues to be visible and legible. Markings and signs that are illegible shall be corrected; •...
- Page 12 REPAIR TO INTRINSICALLY SAFE COMPONENTS Do not apply any permanent inductive or capacitance loads to the circuit without ensuring that this will not exceed the permissible voltage and current permitted tor the equipment in use. lntrinsically safe components are the only types that can be worked on while live in the presence of a flammable atmosphere.
- Page 13 The refrigerant charge shall be recovered into the correct recovery cylinders. The system shall be “flushed” with OFN to render the unit safe. This process may need to be repeated several times. Compressed air or oxygen shall not be used for this task.
- Page 14 make sure that the cylinders and the equipment are removed from site promptly and all isolation valves on the equipment are closed off. m) Recovered refrigerant shall not be charged into another refrigeration system unless it has been cleaned and checked. 10 LABELLING Equipment shall be labelled stating that it has been de-commissioned and emptied of refrigerant.
- Page 15 INSTALLATION Corresponding images can be found on pages 242 - 243. This unit must be installed on an external wall, as it vents directly out of its rear. 1 • Only install the unit on a flat, solid and reliable wall. Ensure that there are no cables, pipes, steel bars or other obstructions behind the wall.
- Page 16 Insert the indoor fixing ring from the vent cover onto the indoor side of the air vent. Then fold the external vent cover in half. Attach the chains to each side of the vent cover, before sliding the cover outside through the vent hole. 6 Expand the external cover, before tightly fixing the chains by hooking onto the indoor fixing ring.
-
Page 18: Installation
INSTALLATION INSTALLATION Mode Of installation On wide stained glass windows exposed to the Before installing the air conditioner it is essential proceed with a calculation of summer heat loads (ed winter in the Sun And appropriate that there they are curtains case of models with heat pump) relating to local internal or Better masking external (Venetian blinds, interested . -
Page 19: Assembly Of The Unit
INSTALLATION Assembly of the unit For The fixing to wall to execute the 6 holes concerning to the The manufacturer cannot be held responsible for any anchorage of the bracket Of fixing to wall as indicated on underestimation of the structural consistency of the the drilling template. - Page 20 INSTALLATION Preparation of condensate drain For machines that also work in cooling, to the unit needs In this case, take care that the expelled water does to to be connected The tube Of I unload condensate not cause damage or inconvenience to things or (internal Ø16mm not supplied) to be connected to the people.
- Page 21 INSTALLATION...
-
Page 22: Insertion Of The Appliance On The Bracket
INSTALLATION Insertion of the appliance on the bracket After have checked That there bracket Of fixing is well distanced from the wall by means of a wooden wedge or anchored at the wall, And That they are stay done, In other similar object. - Page 23 INSTALLATION Attacks plumbers Water discharge IMPORTANT reversal of inlet/exhaust connections can to cause malfunctions of the appliance and any damage CARICO ACQUA Devices plumbers from to integrate For there safety As previously mentioned, the installer will have to take to be installed the devices indicated in figure under. care of this to some devices For there safety And correct maintenance of the appliance.
- Page 24 INSTALLATION Hydraulic characteristics e water chemicals The KVS from the valve used And : The internal water supply circuit has (as an option) a two- way modulating valve, driven directly by the interface from Kv (m³/h with ∆p = 100kPa = 1bar) = 1,2 the machine controller, which monitors the temperature of the water leaving the exchanger regulating the influx Of The general expression (valid for water or technically...
-
Page 25: Connection Electric
INSTALLATION Connection electric The appliance is equipped with a power cable with an AND possible proceed to the connection electric through F+E type plug (CEE 7/7 Schuko plug). a cable cashed in the wall as in position indicated in the The cable can to be replaced Alone from the builder, from installation template... - Page 26 INSTALLATION Alarm display on Oslo 4.0 and 5.0 DCI displays In the event of an appliance fault, an alarm code appears on the display. CODE (Compressor IPM error) PFC /IPM (PFC/IPM error) Compressor start error Compressor running out of step...
-
Page 27: Configuration Installation High Low
INSTALLATION Configuration installation high Low (OPTIONAL, NOT INCLUDED) The unit can be installed both in the lower part of the wall also for installing the unit in the upper part of the wall with (adjacent to the floor) and in the upper part of the wall a cooling function, allowing to increase the flow of air in (adjacent to the ceiling). - Page 28 INSTALLATION 2.10 Setting for cooling-only or heating-only mode (factory-set, non-activatable) With a simple procedure it is possible to deactivate the to the Co (cooling only) function only cooling. to press heating or cooling function. further The key TO For pass at the Ho (heating only) Press and hold button A on the touch screen display for 5 function.
- Page 29 MAINTENANCE Utilization of the device No object or structural obstacle (furnishings, curtains, The appliance must not be installed in rooms where plants, foliage, shutters, etc.) must ever obstruct the explosive gases are developed or where there are normal flow of air from both the internal and external humidity temperature conditions...
- Page 30 MAINTENANCE MAINTENANCE Maintenance periodic The air conditioning That you have purchased And state reduced to the minimum and they Yes reduce at Sun studied in a way That the operations Of maintenance cleaning operations outlined below. ordinary they are Cleaning external Before any cleaning and maintenance work, disconnect Do Attention at surfaces sharp.
- Page 31 MAINTENANCE Anomalies And remedies In case of malfunction of the appliance, please check the following table. If, after performing the suggested checks and verifications, the problem persists, contact authorized technical support. Anomalies Possible causes Remedies To verify self there is voltage in net (turning on a lamp at home, for example).
- Page 32 Voltage Of diet Power absorbed maximum Current absorbed maximum Amount Of gas refrigerant Grade Of protection of the casings OSLO 4.0 OSLO 5.0 OSLO 4.0 DCI OSLO 5.0 DCI COOLING POWER 3,57 1,2- 3,57 1,7 - 4,6 HEATING POWER 4,2+0,7...
- Page 33 Remote control functions for Oslo DCI OPERATION CONTROL PANEL Digital display Speed Cooling Increase/Decrease Air supply Timer 10. Speed Heating 11. Mode SILENT 12. Power REMOTE CONTROL The air conditioner can be controlled with the remote control. Two AAA-batteries are required.
- Page 34 FUNCTIONS Press “POWER” to turn the unit On or Off POWER Press to change between the 4 different modes. The display will show the symbol for the mode currently selected. Cooling mode defaults to 22°C and will cool the air while sending warm air outside.
- Page 35 WIFI SETUP AND SMART FEATURES OSLO DCI ONLY WIFI SETUP AND SMART FEATURES WIFI SETUP BEFORE YOU START • Ensure your router provides a standard 2.4ghz connection. • If your router is dual band ensure that both networks have different network names (SSID).
- Page 36 REGISTER THE APP 1. Press on the register button 2. Read the Privacy policy 3. Enter your email address at the bottom of the screen. and press the Agree Button. or phone number and press continue to register. 4. A verifi cation code will be 5.
- Page 37 SETTING UP YOUR HOME WITHIN THE APP SMART LIFE is designed so it can work with a large number of compatible smart devices within your home. It can also be set up to work with multiple devices within different houses As such during the setup process, the app requires that differen t areas are created and named to allow easy management of all your devices.
- Page 38 CONNECTING USING QUICK CONNECTION Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing twice per second. If not follow the instructions for changing the connection mode. Also ensure your phone is connected to the wifi network. (We advise turning mobile data off during setup) 1.
- Page 39 CONNECTING USING AP MODE (ALTERNATIVE METHOD) Before initiating the connection, make sure the unit is in standby mode, with the wifi light flashing once per second. If not follow the instructions for changing the wifi connection mode. Also ensure your phone is connected to the wifi network. (We advise turning mobile data off during setup) 1.
- Page 40 CONTROLLING YOUR DEVICE THROUGH THE APP THE HOME SCREEN Change Home: If you Add Device: Add a have a number of device to the app, and units at different go through the setup houses, you can change process. between them Environmental Room Management: information: Provides...
- Page 41 DEVICE SCREEN The device screen is the main control screen for the air conditioner, providing access to the controls to amend the functions and settings Edit Name: Use to change the name of the air conditioner. Back: Returns to the Desired Room Temperature: Displays Home Screen...
- Page 42 SMART SCENES Smart Scenes is a powerful tool providing the option to customise the operation of the air conditioner based both on conditions within the room and outside influences. This gives the user the option of specifying much more intelligent actions. These are split into two catagories Scene and Automation.
- Page 43 AUTOMATION Automation allows an automatic action to be set up for the device. This can be triggered by the Time, indoor temperature, humidity of the room, weather conditions, and a range of other influences. 1. Press on the Smart Scene tab 2.
- Page 44 PROFILE TAB The profile tab gives you the option to edit both your detail, and use the added features of the unit. CHANGING THE NAME OF YOUR DEVICE When in any of the device screens further settings for the device can be accessed, by pressing on the three dots in the top right hand corner.
- Page 45 TROUBLE SHOOTING Do not repair or disassemble the air conditioning. Unqualified repair will invalidate the warranty and may lead to failure, causing injuries and property damage. Only use it as directed in this user manual and only perform operations advised here. Problem Reasons Solution...
- Page 46 ERROR CODES Fault Fault Code Fault Description Code Fault Description Compressor IPM error EE error(outdoor) Return air sensor temperature PFC/IPM error abnormal protection Over-heat protection on top of Compressor start error compressor Compressor running out of step Abnormal refrigerant circulation Location detection loop failure Exhaust temperature protection Coil tube overload protection...
- Page 47 Oslo 4.0 and 5.0 on/off R32/410...
- Page 50 OSLO 4.2 4156(14185) 4863(16600) 1337 1347...
- Page 67 Versions H20 Oslo 4.0/5.0 - Metropolis 12hp H20 WARRANTY TERMS Fintek srl guarantees its products for a period of 1 year from the date of purchase if intended for professional use, 24 months* for private use. The purchase must be evidenced by...
- Page 68 WARRANTY CERTIFICATE AND ITALIAN MARKET STANDARDS Fintek Srl guarantees assistance on products branded by Fintek Srl or distributed by the same for its own brands installed in the national territory, including Italy, San Marino, and Vatican City, for manufacturing defects, provided they are defective in materials or manufacturing. The warranty consists of carrying out technical interventions at the customer’s premises or at our...
- Page 69 However, they entail repair with expenses entirely borne by the customer. 4.1.3 Products sent to Fintek Srl or authorized C.A.T. that are found to be functional or lacking the tamper-proof seal are not covered by the warranty. In this case, the expenses will be charged to the customer.
- Page 70 EN50366 (REQUIREMENTS ACCORDING TO THE MACHINES ARE MARKED WITH THE ANNEX 1) CONFORMITY MARKING. DIRECTIVE 2006/95/EC ON LOW VOLTAGE (EN55014-1, EN61000-3-2, EN61000-3-3, EN55014-2) INVOICE DATE ___________________________________________________________ TESTING DATE ________________________________________________________________ NOT REQUIRED UNLESS FROM AUTHORIZED FINTEK SERVICE CENTERS SERIAL NUMBER ____________________________________________________...
- Page 72 Discover the presentation videos of our air conditioners and much more on our YouTube channel. via Tonso di Gualtiero, 46 47896 Faetano RSM Tel +378 0549 901 950 commercialeitalia@finteksrl.com www.finteksrl.com WWW.FINTEKSRL.COM WWW.FINTEKSRL.COM...
Need help?
Do you have a question about the OSLO 4.0 and is the answer not in the manual?
Questions and answers