Description; Using Moulds And Accessories - TEFAL Cake Factory Infinity Manual

en
9
2
5

Description

1 Lid
2 Control panel
3 Appliance base
4 Non-stick aluminium mould
5 Tart mould
6 Baking tray
7 Non-stick steel muffin moulds (x9)
18
1
12
8
3
4
6
10
11
8 Power cable
9 Black reflector
10 Holder for 9 individual moulds
11 Glass pots + plastic lids (x9)
12 Lid open/close handles

Using moulds and accessories

To ensure the proper operation of your appliance, when filling the moulds, do not exceed the
proportions indicated.
Non-stick aluminium mould
Grease the mould Fill the mould Ensure that the
black reflector is
properly in place
and attached to
the bottom of the
appliance
Steel moulds
Fill the moulds 3/4 full.
Pour the mix into Place the moulds Put the holder into
the steel moulds into the holder the appliance
After cooking
Wear oven gloves Place the holder Remove the moulds
when removing the on a heatproof from the holder one
holder from the surface at a time
Cake Factory
You can mix the different moulds, using the same recipe and the same quantity for each mould.
Insert the mould Close the appliance
Close the appliance
Allow to cool for a
few minutes before
removing from the
moulds.
en
19