Subscribe to Our Youtube Channel
Related Manuals for Speco N8NRX
Summary of Contents for Speco N8NRX
- Page 1 NRX (8 and 16 Channel) Quick Start Guide N8NRX N16NRX Version 1.0 Features and specifications are subject to change, please check www.specotech.com for firmware updates.
- Page 2 1.2 Connections To quickly get started, connect the following to your recorder in the following order, please refer to Figure 1 (N8NRX shown for reference). 1. Connect IP cameras to the PoE ports of the recorder.
- Page 3 Figure 1 (8 channel unit shown) Set Password and Security Questions 2.1 Enter a password Note: You will be prompted to set a Password and security questions upon initial bootup. See Fig. 2-1 The default login ID and administrator username is: admin The password strength indicator can be used as a reference.
- Page 4 Figure 2 3. Update Firmware (if necessary) Speco will continuously make improvements, please check the website to ensure you are running the latest firmware version. 3.1 Check firmware version on recorder You can click Start→Settings→System→Information→Basic go to “About this machine” and click on “view”. You will then be able to see the firmware version number and build date.
-
Page 5: Updating Firmware
Figure 3-1 Figure 3-2 If the web has a more recent firmware version than your recorder’s build date, then please update your device to the latest firmware. 3.2 Updating Firmware... - Page 6 1. Copy the upgrade software into the USB storage device. 2. Insert the USB storage device into the USB interface of the NVR. 3. Click Start→Settings→System→Maintenance→Upgrade to go to “Upgrade” interface. Select the USB device in “Device Name” option and go to the path where the upgrade software exists. Select the upgrade software and then click “Upgrade”.
-
Page 7: Disk Settings
Figure 4-1 4.2 Disk Settings Disk Settings. You can view the disk number, disk capacity of the NVR and serial number, Read/Write status of the disk. Click “Format” to format the disk. Click “Next” to continue. 4.3 EZ Network Setup ... -
Page 8: Upnp Configuration
Figure 4-2 If you use the NVR with the PoE network ports, the online state of the internal Ethernet port will be shown on the interface. 4.4 UPnP Configuration By UPnP you can access the NVR through IE client which is in WAN via router without port mapping. ... -
Page 9: Ddns Settings
Figure 4-3 4.5 DDNS Settings DDNS is used to control the dynamic IP address through domain name. Speco Technologies provides free DDNS service with US-based servers. You can access the NVR easily if the DDNS is enabled and configured. Click Start→Settings→... -
Page 10: Record Settings
Figure 4-5 Click to edit an IP camera as shown on the below left. Input the new IP address, subnet mask, gateway, username, and password of the camera. You can check “Sync to IPC” to modify the IP address of the IP camera via different network segments for being in the same network segment with the NVR. - Page 11 Enable the NAT function in the interface or set it in the network configuration after exiting the wizard (please refer to manual for details). You can scan the QR Code through the Speco Blue App available for iOS and Android to view your...
-
Page 12: Web Browser Access
4.9 Web Browser Access Click Start→Settings→Network→NAT to go to the interface for NAT configuration and check “Enable”. Click “Apply” to save the settings and make note of the QR code number under the QR code. Via Internet Explorer, go to connect.specotech.cloud, input the QR code number, your username and password to login. - Page 13 5. EZ search EZ Search- Quickly search an instance using video thumbnails Click Start→Search and Export→EZ search. There are two view modes: by time and by camera. In the time view mode, a maximum of 64 camera thumbnails can be shown. ...
- Page 14 For detailed operation information, please refer to the user’s manual.
Need help?
Do you have a question about the N8NRX and is the answer not in the manual?
Questions and answers