Advertisement
Quick Links
Mechanical Touch Switch
Detects Objects in Multiple Directions
with High Sensitivity, Ideal for Robotics
Detects object contact from multiple directions
and operates even with a slight force.
Slow-action switching mechanism used. Move-
ment differential as small as 0.01 mm assures
high accuracy of detection.
Gold-plated contact with coil spring capable of
switching micro current/voltage load while provid-
ing high contact reliability.
Highly resistant to dust, fine particles and water or
oil splash, conforming to IP67.
Three sizes (M10, M8, and M5) and three types of
actuators (hemispheric, cone-shaped, and wobble
stick).
Ordering Information
Model Number Legend
D5B-@@@
1 2
3
1. Size
5: M5
8: M8
1: M10
2. Actuator
01: Hemispheric
02: Cone-shaped
51: Wobble stick (short spring)
53: Wobble stick (long spring). Only with the M10 type.
List of Models
Type
Hemispheric actuator
Cone-shaped actuator
Short spring
Wobble stick
actuator
Long spring
3. Cable length
1: 1 m
3: 3 m
5: 5 m
Cable length
1 m
D5B-5011
3 m
D5B-5013
5 m
D5B-5015
1 m
D5B-5021
3 m
D5B-5023
5 m
D5B-5025
1 m
D5B-5511
3 m
D5B-5513
5 m
D5B-5515
1 m
---
3 m
---
5 m
---
M5
M8
D5B-8011
D5B-8013
D5B-8015
D5B-8021
D5B-8023
D5B-8025
D5B-8511
D5B-8513
D5B-8515
---
---
---
D5B
M10
D5B-1011
D5B-1013
D5B-1015
D5B-1021
D5B-1023
D5B-1025
D5B-1511
D5B-1513
D5B-1515
D5B-1531
D5B-1533
D5B-1535
265
Advertisement
Related Manuals for Omron D5B
Summary of Contents for Omron D5B
-
Page 1: Ordering Information
Highly resistant to dust, fine particles and water or oil splash, conforming to IP67. Three sizes (M10, M8, and M5) and three types of actuators (hemispheric, cone-shaped, and wobble stick). Ordering Information... -
Page 2: Specifications
1. The above figures are initial values. 2. Life expectancy values are calculated at an operating temperature of 5 C to 35 C, and an operating humidity of 40% to 70%. Contact your OMRON sales representative for more detailed information on other operating environments. -
Page 3: Operating Characteristics
2. The operating principle of the Mechanical Touch Switch is similar to that of the ordinary switch in that the Mechanical Touch Switch has a switch inside the housing operated by the movement of the actuator which in turn is moved by the force applied to it. -
Page 4: Operation
Note: 1. All units are in millimeters unless otherwise indicated. 2. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. Values in parentheses () are cumulative values and may exceed tolerance of 0.4 mm. 3. The square @ in the models represents the cable length. Refer to Ordering Information. - Page 5 3 11.8±2 Clamping nut Toothed lock washer Note: 1. Operating characteristics (X, Y) measuring position 2. The threads of the case are not standard. Therefore standard tapping to the case is not possible for mounting. M10 Type Hemispheric Plunger (33.3)
-
Page 6: Correct Use
D5B. Refer to the general precautions of 10 dia. hole Limit Switches for details. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. C060-E1-5...