Basic Operations - Omron CX-MOTION - 06-2008 Operation Manual

Basic Operations

3-1 Basic Operations
Starting the CX-Motion-MCH
Starting the CX-Motion-MCH Using Start Special Application - Start with Settings Inherited from the I/O
Table Window Opened from the CX-Programmer That Was Installed from the CX-One
1,2,3...
14
1. Right-click a Motion Control Unit in the I/O Table Window and select Start
Special Application - Start with Settings Inherited from the pop-up
menu.
2. The CX-Motion-MCH will be started, a new project will be created, and a
Motion Control Unit will be added automatically. The Motion Control Unit
model will be inherited as shown below.
Section 3-1