Intended Audience; General Precautions; Safety Precautions - Omron CX-MOTION - 06-2008 Operation Manual

Intended Audience

1 Intended Audience
2

General Precautions

!WARNING
3

Safety Precautions

!WARNING
!WARNING
!WARNING
!Caution Check that the axis number is correct before operating an axis from the CX-
!Caution Confirm safety at the destination node before transferring parameters or other
xviii
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
The user must operate the product according to the performance specifica-
tions described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment, amuse-
ment machines, safety equipment, and other systems, machines, and equip-
ment that may have a serious influence on lives and property if used
improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating the Unit. Be
sure to read this manual before attempting to use the Unit and keep this man-
ual close at hand for reference during operation.
It is extremely important that the CX-Motion-MCH and related devices be
used for the specified purpose and under the specified conditions, especially
in applications that can directly or indirectly affect human life. You must con-
sult with your OMRON representative before applying Motion Control Units
and related devices to the above-mentioned applications.
Do not attempt to take any Unit apart while the power is being supplied. Doing
so may result in electric shock.
Never touch any of the terminals while power is being supplied. Doing so may
result in serious electric shock.
Always back up programs, parameter data, position data, or cam data to the
flash memory after it has been transferred to the Motion Control Unit. If trans-
ferred data is not backed up in flash memory, the previous settings may be
used the next time the power is turned ON, resulting in a malfunction.
Motion-MCH.
data to another node. Doing either of these without confirming safety may
result in injury.
1