Performing A Control Solution Test - Abbott FreeStyle Optium Neo H Operator's Manual

Performing a Control Solution Test

Step
1
2
31
Action
Open the foil test strip packet at the notch and tear down to
remove the test strip.
Insert the test strip into the meter until it stops. This will turn on
the meter.
Notes:
• Check that the meter screen is working properly each time you
turn the meter on. If you see any white segments in the black off
screen, or any black segments in the white test screen, there may
be a problem with the meter. See 'Using the Meter' section for
more details.
• The meter turns off after 3 minutes of inactivity. Remove and
reinsert the unused test strip to restart the meter.