Getting Started And Driving - Acekare ENJO User Manual

2. Getting started and driving

The Enjo is delivered ready to use. This means that the brackets [8] and bar [9] have been fitted to the wheelchair by a professional. You
have the motorisation, the control box to attach to the handle.
Your Enjo is now fully functional. You can put it into service by following the instructions in this manual and after having been trained in
its use by your dealer.
Check regularly that the clamps [8] are still tightly screwed to the wheelchair.
If the screws are loose, retighten them.
As the Enjo has no braking function, the wheelchair must be fitted with brakes. Ideally two drum brakes for users who are
not physically able to stop it in all driving situations. If not, the user must be able to stop the wheelchair.
If the Enjo is brought to a rapid stop using the brakes, the wheelchair user must be capable, both physically and in terms
of reaction time, of coping with the resulting acceleration and braking forces. If he/she is unable to do so, the Enjo must be
used with the seat belts fastened.
It is strictly forbidden for any untrained person to use the Enjo.
It is expressly recommended that anti-tip supports are fitted to the wheelchair.
Before using your Enjo, make sure you have read all the instructions for use, safety instructions and risk warnings in this
manual.
Do not handle or use the Enjo if it behaves in an unusual or faulty manner.
9