Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KTM SX-E 2 2024
Summary of Contents for KTM SX-E 2 2024
- Page 1 SETUP INSTRUCTIONS 2024 SX‑E 2 Art. no. 3240008en...
- Page 3 KTM accepts no liability for delivery options, deviations from fig- ures and descriptions, misprints, and other errors. The models portrayed partly contain special equipment that does not belong to the regular scope of supply.
-
Page 4: Means Of Representation
1 MEANS OF REPRESENTATION Symbols used The meaning of specific symbols is described below. Indicates an expected reaction (e.g. of a work step or a function). Indicates an unexpected reaction (e.g. of a work step or a function). Indicates a page reference (more information is provided on the specified page). Indicates information with more details or tips. - Page 5 SETUP 2 Unpacking and setting up the vehicle – Open the box. Guideline To avoid damaging the vehicle while setting it up, do not remove the protective film on each component until installing the component, and leave it on the vehicle until work has been completed.
- Page 6 Install the LV traction battery. ( p. 12) – Prepare the vehicle according to the specifications in W00595-10 KTM Dealer.net for handover to the customer. – Mount the footrests as required by the customer. – Check the factory-set frame height.
- Page 7 WORK 3 Raising the motorcycle with a lift stand Note Danger of damage The parked vehicle can roll away or fall over. – Park the vehicle on a firm and level surface. – Raise the motorcycle with a suitable lift stand on the underride guard.
- Page 8 3 WORK Mounting the seat – Hook the seat onto holding lug, lower the seat at the rear, and push it forward. W00494-10 – Mount and tighten screw Guideline Seat fixing screw 6 Nm (4.4 lbf ft) W00493-10 Adjusting the handlebar position Warning Danger of accidents A repaired handlebar poses a safety risk.
- Page 9 WORK 3 Info Make sure the installed gap widths are even. Adjusting the seat height on the shock absorber Warning Danger of accidents Modifications to the suspension setting may seriously alter the handling characteris- tic. – Make sure your child rides slowly to start with after making adjustments in order that he or she can assess the new handling characteristic.
- Page 10 3 WORK Info The seat height can be infinitely adjusted by pushing the fork legs through. If the seat height is adjusted on the fork, the seat height should also be adjusted on the shock absorber. Preparatory work – Raise the motorcycle with a lift stand. ( p.
- Page 11 WORK 3 Adjusting the footrest bracket on the frame – Loosen screw – Loosen screw – Loosen screw – Position the footrest bracket according to the required seat height. Guideline Upper position of the footrest bracket Lower position of the footrest bracket –...
- Page 12 3 WORK 3.10 Installing the left side cover Main work – Position the side cover and engage in area – Mount and tighten screw Guideline Seat fixing screw 6 Nm (4.4 lbf ft) – Mount and tighten screw Guideline Side cover screw 2 Nm (1.5 lbf ft) W00527-11 Finishing work...
- Page 13 WORK 3 3.13 Installing the front wheel Warning Danger of accidents Oil or grease on the brake discs reduces the braking effect. – Always keep the brake discs free of oil and grease. – Clean the brake discs with brake cleaner when necessary. Main work –...
- Page 14 3 WORK Main work – Remove nut W00508-10 Warning Danger of accidents Damaged brake discs reduce the braking effect. – Always lay the wheel down in such a way that the brake disc is not damaged. – Hold front wheel and remove wheel spindle. Take the front wheel out of the fork.
- Page 15 WORK 3 – Open cover of the battery compartment. – Press LV traction battery into the battery compartment until the release buttons engage. Guideline Make sure the LV traction battery terminals are clean and correctly positioned. – Close cover of the battery compartment. –...
- Page 16 3 WORK Warning Risk of injury There is a risk of electric shock if the battery charger or the cables have been manipulated or damaged. The battery charger does not contain any parts which require maintenance. – Do not modify the battery charger or the cables. –...
- Page 17 WORK 3 3.18 Charging the LV traction battery Warning Risk of injury Using an incorrect battery charger can cause the lithium-ion battery (traction battery) to overheat, explode or catch fire. – Only use the LV traction battery and battery charger combination specified by the manufacturer. Note Environmental hazard A lithium-ion battery (LV traction battery) contains components and elements that are harmful to the environment.
-
Page 18: Technical Specifications
4 TECHNICAL SPECIFICATIONS Chassis tightening torques EJOT DELTA PT Battery compartment screws ® K40x12 0.5 Nm (0.37 lbf ft) EJOT PT Fender on start number plate ® K60x20AL 2 Nm (1.5 lbf ft) screw Lower subframe screw EJOT PT ® K70x25 6 Nm (4.4 lbf ft) Remaining screws on chassis... - Page 19 TECHNICAL SPECIFICATIONS 4 Swingarm pivot nut 25 Nm (18.4 lbf ft) Top shock absorber screw M8x65 20 Nm (14.8 lbf ft) Underride guard screw M8x25 20 Nm (14.8 lbf ft) Front wheel spindle nut 40 Nm (29.5 lbf ft) Remaining nuts, chassis 45 Nm (33.2 lbf ft) Remaining screws, chassis 45 Nm (33.2 lbf ft)
-
Page 20: Auxiliary Substances
5 AUXILIARY SUBSTANCES Long-life grease Recommended supplier MOTOREX ® – Bike Grease 2000... - Page 21 *3240008en* 3240008en 28.11.2023 KTM Sportmotorcycle GmbH 5230 Mattighofen/Austria Photo: Mitterbauer/KISKA/KTM KTM.COM...
Need help?
Do you have a question about the SX-E 2 2024 and is the answer not in the manual?
Questions and answers