Adjusting Settings Via The Operating Menu; The Main Menu "Menu - Sennheiser SKP 100 G3 Instruction Manual

Adjusting settings via the operating
menu
Make use of the possibility to adjust settings via the operating
menu of your receiver and to transfer these settings to the plug-
on transmitter.
For more information, refer to the instruction manual of the
receiver. The relevant information is marked with the sync icon.

The main menu "Menu"

Adjusting the input sensitivity – "Sensitivity"
Menu
S e n s i t i v i t y
–12 dB
Call up
"Sensitivity"
Adjustment range: 0 to –48 dB, adjustable in steps of 6 dB
The audio level display "AF"
even if the plug-on transmitter is muted, e.g. allowing you to
check the adjusted sensitivity before live operation.
Input sensitivity
adjusted ...
... too high
... correctly
... too low
Adjust a low input sensitivity when using condenser microphones,
adjust a high input sensitivity when using dynamic microphones.
Selecting the frequency bank and the channel manually –
"Frequency Preset"
Menu
Frequency Preset
B.Ch: 5.12
Call up "Frequency
Preset"
When you are in the
is deactivated.

Adjusting settings via the operating menu

SET
S e n s i t i v i t y
– 12
Select the desired
setting
"Stored"
B.Ch: 20.12
533.875 MHz
P
MUTE
AF
Effect/display
Close talking distances, speakers with loud voices or
loud music passages cause overmodulation in the
transmission link.
The audio level display "AF"
for the duration of the overmodulation.
The audio level display "AF"
only during the loudest passages.
The transmission link is undermodulated. This
results in a signal with high background noise.
SET
Frequency Preset
B.Ch: 5.12
792.525MHz
Select the frequency
bank and confirm
"Stored"
"Frequency
S e n s i t i v i t y
dB
Store the setting
always indicates the audio level,
shows full deflection
shows full deflection
SET
Frequency Preset
B.Ch:
Select the channel;
store the setting
Preset" menu item, the RF signal
–36 dB
SET
1.12
818.850MHz
SET
13