Adjusting Settings Via The Operating Menu; The Main Menu "Menu - Sennheiser SK 300 G3 - 01-09 Instruction Manual

Adjusting settings via the operating menu

Adjusting settings via the
operating menu
Make use of the possibility to adjust settings via the
operating menu of your receiver and to transfer
these settings to the bodypack transmitter.
For more information, refer to the instruction
manual of the receiver. The relevant information is
marked with the sync icon.

The main menu "Menu"

Adjusting the input sensitivity – "Sensitivity"
Menu
Sensitivity
–12 dB
Call up
"Sensitivity"
Adjustment range: 0 to –60 dB, adjustable in steps of 3 dB
The audio level display "AF"
audio level, even if the bodypack transmitter is
muted, e.g. allowing you to check the adjusted
sensitivity before live operation.
B.Ch: 20.24
531.375
P
MUTE
AF
Input sensitivity is
adjusted ...
... too high
... correctly
... too low
20
Sensitivity
–12 dB
Select the desired
setting
"Stored"
MHz
Effect/display
Close talking distances, speakers
with loud voices or loud music
passages cause overmodulation in
the transmission link. The yellow
AF PEAK LED
level display "AF"
deflection for the duration of the
overmodulation.
The audio level display "AF"
shows full deflection only during the
loudest passages.
The transmission link is undermodu-
lated. This results in a signal with
high background noise.
Sensitivity
–36
Store the setting
always indicates the
lights up. The audio
shows full
dB