Summary of Contents for TEKTELIC Communications COMFORT
Page 1
Room Sensor). The Technical Reference Manuals applicable to each revision are provided in the attachments. COMFORT refers to the base model. VIVID refers to the PIR model. Before selecting a TRM, you will have to identify your model and revision of the COMFORT/VIVID sensor. Please always check out the attachments for most up-to-date documents. https://support.tektelic.com/portal/en/kb/articles/srs-trm...
Page 2
T-code Revision Serial number Firmware Version Some TRMs correspond to specific firmware versions of the COMFORT/VIVID sensor. To determine this, you will need to send the following downlink to the sensor: Hex: 0x71 Port: 100 When the sensor responds, the first 3 bytes determine what the FW version of the device is.
Page 3
T0004885, T0004886, T0005370_TRM_verRevC-1.1.pdf T0004893, T0004895, T0004896, T0004897 D and above T0005370_TRM_ver1.2.pdf T0006115, T0006116, C and below 1.3.0 and below T0006338_TRM_ver1.3.pdf T0006117, T0006118, T0006163, T0006164, 2.1.0 T0006338_TRM_ver2.3.pdf T0006161, T0006162 T0006115, T0006116 D and above 3.0.10 T0006338_TRM_ver3.1.pdf Please note that support for older sensors (T-Codes T0004XXX) will have limited support. https://support.tektelic.com/portal/en/kb/articles/srs-trm...
Need help?
Do you have a question about the COMFORT and is the answer not in the manual?
Questions and answers