Subscribe to Our Youtube Channel
Related Manuals for Draper 16232
Summary of Contents for Draper 16232
- Page 1 Original Instructions Version 1 – January 2024 TOUCH SCREEN DIGITAL MULTIMETER 16232...
-
Page 2: Table Of Contents
2. Contents All photographs and drawings within this manual are 3. Product Introduction supplied by Draper Tools to help illustrate correct Intended Use operation of the product. Specification Every effort has been made to ensure the information contained in this manual is accurate. -
Page 3: Product Introduction
It can also automatically identify and +/-(2.5% +10) measure AC/DC voltage and resistance. Max Resolution: Any other application beyond the conditions established for use will be considered misuse. Draper Tools accepts no Resistance: responsibility for improper use of this product. Measurement Range: 0.1Ω to 60MΩ... -
Page 4: Explanation Of Symbols
4. Explanation of Symbols Read the instruction manual Measures DC Voltage USB C rechargeable battery Do not abandon in the Measures AC Voltage European conformity environment Keep out of the reach of Measures resistance UK Conformity Assessed children WEEE – Waste Electrical & Measures diode forward Electronic Equipment Warning! -
Page 5: Health And Safety Information
− DO NOT use any other leads with this product than not in contact with the ground while taking those supplied. Contact Draper Tools for measurements, use insulating materials to prevent replacement options if the leads become damaged. the current from earthing. -
Page 6: Identification And Unpacking
6. Identification and Unpacking Product Overview (18) (19) (13) (12) (16) (11) (14) (10) 14. Negative (black) test lead Power button 15. Negative contact tip cover Torch & function indicator 16. Positive (red) test lead NCV zone 17. Positive contact tip cover LCD touch screen 18. -
Page 7: What's In The Box
If any part is Replace faulty leads immediately. damaged or missing, do not attempt to use the product. Please contact the Draper Helpline; contact details can be For each measurement type, connect the negative test lead found at the back of this manual. -
Page 8: Ac/ Dc Voltage And Resistance Test Measurements
Diode Testing • Automatic Power OFF – The Multimeter will automatically switch off after 15 minutes if no operation 1. Press the AUTO SELECT button (12) until the diode test has occurred. There will be 5 beeps before it shuts down. function is selected. -
Page 9: Ncv Test Function
2. Press the HOLD/TORCH (6) for 3 seconds to turn the Draper Tools will endeavour to hold any spare parts, if torch on. Press again to turn off the torch. applicable, for seven years from the date that it sells the final matching stock item. -
Page 10: Warranty
This warranty supersedes any other guarantees expressed or implied and variations of its terms are not authorised. Your Draper Tools guarantee is not effective until you can produce, upon request, a dated receipt or invoice to verify your purchase within the guarantee period. -
Page 11: Notes
Notes – 11 –... - Page 12 Telephone Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 General Fax: +44 (0) 23 8026 0784 Please contact the Draper Tools Product Helpline for repair and servicing enquiries. © Published by Draper Tools Limited...
Need help?
Do you have a question about the 16232 and is the answer not in the manual?
Questions and answers