HOMCOM 824-072V70 Operating Manual page 7

Transport and storage
Note
If you store or transport the device improperly, the device may be damaged.
Note the information regarding transport and storage of the device.
Transport
To make the device easier to transport, it is fitted with wheels.
Before transporting the device, observe the following:
-Switch the device off.
-Hold onto the mains plug while pulling the power cable out of the mains socket.
-Do not use the power cable to drag the device.
-Only wheel the device on a level and smooth surface.
After transporting the device, observe the following:
Set up the device in an upright position after transport.
Storage
Before storing the device, observe the following:-Empty and clean the water tank
prior to storage.
-Allow the honeycomb filter to dry prior to storage. Otherwise the device may
distribute a musty smell after restart.
When the device is not being used, observe the following storage conditions:
-Dry and protected from frost and heat
-In an upright position where it is protected from dust and direct sunlight
-With a cover to protect it from invasive dust if necessary
-Place no further devices or objects on top of the device to prevent it from being
damaged.
-Remove batteries from the remote control.
Start-up
Do not use the air cooler near curtains or other inflammable places, the spacing is
at least 0.5m.
Operation
-Avoid open doors and windows.
Operation elements
Control panel
6