Neotap-- Faucet Operation - Spring NEOTAP Installation And Operation Manual

MULTITAP FAUCET - SYMBOLS
HOT WATER TEMPERATURE AND ECO MODE DISPLAY
When the light source is off, ECO mode will be starting to shut off water heating
system after 1 minute
The ECO mode will be off to start reheating automatically after 1 minute when the light
is on again
SETTINGS SYMBOL / REHEATING
- Press once to start hot water reheating
- Press and hold for 5 seconds to enter setting mode:
In setting mode the chosen temperature setting will be blinking, press once to scroll
through the options
When needed temperature is chosen press any water dispensing button (Hot, cold or
ambient) to save the temperature setting
100100 - Indicates the HOT water will be 1100%00% of the highest temperature
8090 - Indicates the HOT water will be 90%90% of the highest temperature
9080 - Indicates the HOT water will be 80%80% of the highest temperature
Eco mode can also be turned on or off using the above method
Press any button once to unlock all buttons. Please wait 100 seconds before
dispensing water
The tap is in SLEEP MODE when the blue light is on. Press the desired button once and the light will turn
from BLUEE to GREEM to indicate the tap is ready