Changing The Volume Of The Consoles' Built-In Loudspeakers; Turning The Central Unit's Audio Inputs And Outputs On And Off During A Conference; Changing The Configuration Of The Audio Inputs And Outputs During A Conference - Sennheiser SDC 8200 SYS Software Manual

Monitoring and controlling a conference
74

Changing the volume of the consoles' built-in loudspeakers

To change the volume of the consoles' built-in loudspeakers:
Move the mouse pointer to the left-hand margin of the screen.
The tool palette opens.
Move the slider in the "Volume Floor" box.
The volume changes as soon as you release the slider.
Turning the central unit's audio inputs and outputs on and off during a
conference
To turn the audio input and outputs of the central unit on and off:
Move the mouse pointer to the left-hand margin of the screen.
The tool palette opens.
In the "AUX" box, click the check boxes of the audio inputs and output
you want to turn on.
To turn an audio input or output on, a tick must appear in the
corresponding check box. To turn an audio input or output off, NO tick
must appear in the corresponding check box.
Note:
You can also turn the audio inputs and outputs on and off as described
in the following section.
Changing the configuration of the audio inputs and outputs during a
conference
To change the configuration of the audio inputs and outputs during a
conference:
Move the mouse pointer to the left-hand margin of the screen.
The tool palette opens.
In the tool palette, click the "AUX" button.
The "AUX IN/OUT" dialog box opens.