Draper 17111 Manual

Draper 17111 Manual

Infrared diesel space heater

Advertisement

Quick Links

EN
Original Instructions
Version 2 – February 2024
INFRARED
DIESEL SPACE
HEATER
17111

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 17111 and is the answer not in the manual?

Questions and answers

Summary of Contents for Draper 17111

  • Page 1 Original Instructions Version 2 – February 2024 INFRARED DIESEL SPACE HEATER 17111...
  • Page 2: Copyright © Notice

    All photographs and drawings within this manual are document is part of the product; retain it for the life supplied by Draper Tools to help illustrate correct of the product, passing it on to subsequent holders. operation of the product.
  • Page 3: Table Of Contents

    2. Contents 1. Preface 1.1 Product Reference 1.2 Revisions 1.3  Understanding the Safety Content of This Manual 1.4 Copyright © Notice 2. Contents 3. Product Introduction 3.1 Scope 3.2 Specification 4. Health and Safety Information 4.1 General Health and Safety Precautions 4.2 Additional Safety information for this Heater 4.3 Electrical Safety 4.4 Health and Safety Information for the Use of Diesel and Kerosene Fuel...
  • Page 4: Product Introduction

    Supplied with automatic ignition and fitted with a use. photocell safety device with heat protection. Any other application beyond the conditions established for use will be considered misuse. Draper Tools accepts no responsibility for improper use of this product. 3.2 Specification Stock No.
  • Page 5: Health And Safety Information

    WARNING! DO NOT use this product if it is • The heater must ONLY be used in its normal operating damaged or leaking in any way. Contact Draper position. Tools for repair and replacement options. • An outside air opening of at least 3 square foot (2,800 • Use the product only for its intended purpose and as...
  • Page 6: Electrical Safety

    4. Health and Safety Information • ALWAYS check that the heater is positioned safely • DO NOT use this heater with a programmer, timer, before turning it on. separate remote-control system or any other device that switches the heater on automatically as it may be • NEVER leave the heater unattended while it is on covered or positioned incorrectly when activated and under any circumstances.
  • Page 7: Service

    • If the power supply cord is damaged, it must be replaced by Draper Tools, an authorised service agent or similarly qualified personnel in order to avoid a hazard. • The damaged or incomplete plug, when cut from the cable, must be disabled to prevent connection to a live electrical outlet.
  • Page 8: Identification And Unpacking

    Carefully remove the product from the packaging and examine it for any signs of damage that may have occurred during shipment. If any part is damaged or missing, do not attempt to use the product. Please contact the Draper Helpline; contact details can be found at the back of this manual.
  • Page 9: Packaging

    5. Identification and Unpacking 5.2 Packaging WARNING! Keep packaging materials out of Keep the product packaging for the duration of the warranty period in case the product needs to be returned reach of children. Dispose of packaging correctly and responsibly and in accordance for repair.
  • Page 10: Operating Instructions

    7. Operating The Heater 7.1 Starting The Heater 7.5 The Safety System WARNING: Ensure the heater is stood on a • Temperature Limit Control: This heater is equipped NON-COMBUSTIBLE SURFACE! with a temperature limit control designed to turn the heater off should the internal temperature rise to an 1.
  • Page 11: Maintenance And Troubleshooting

    For aftersales servicing or warranty repairs enquires, • In the event that incorrect or contaminated fuel is contact the Draper Tools Helpline for assistance – contact used in the heater, it must be replaced immediately. details can be found on the back of this manual.
  • Page 12: Spares, Returns And Disposal

    Draper Tools Product Helpline for details of your nearest authorised agent. Draper Tools will endeavour to hold any spare parts, if applicable, for seven years from the date that it sells the final matching stock item.
  • Page 13: Warranty

    This warranty period covers parts and labour for 12 months from the date of purchase. Your Draper Tools guarantee is not effective until you can Where tools have been hired out, the warranty period produce, upon request, a dated receipt or invoice to covers 90 days from the date of purchase.
  • Page 14 Notes – 14 –...
  • Page 15 Notes – 15 –...
  • Page 16 Telephone Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 General Fax: +44 (0) 23 8026 0784 Please contact the Draper Tools Product Helpline for repair and servicing enquiries. © Published by Draper Tools Limited...

Table of Contents