HOMCOM TSP40-RA Manual page 4

Fill the water tank:
Unscrew the valve cover to open the tank turning it anticlockwise, fill the tank with cold
and clean water making sure not to overfill it. To close the tank, screw the valve cover
back on securely turning it clockwise. Turn the tank over and place it back into its
designated space at the back of the fan main body.
Loosen tighten.
ATTENTION!
● Make sure the product is unplugged from the mains before filling or refilling the water
tank.
● Only use water in the water tank. Do not add any chemicals, oils or other additives.
● Only use cold or lukewarm water in the water tank. The water must not be warmer than
40°C.
Place the fan on a dry and stable surface and insert the plug on the socket; the unit will
emit a short "BIP" sound indicating that power is supplied. For your convenience the unit
can be operated by using control panel in the main body or by using remote control
included.
Control panel
Indicator light:
1. Natural mode indicator
2. Sleeping mode indicator
3. Oscillation
4. Mist volume indicator: minimum-medium-
maximum
5. Timer
6. Speed: low-medium-high
7. Power on indicator
Remote Control
Buttons:
A. On/Off
B. Speed
C. Mode
D. Timer
E. Oscillation
F. Mist
4