Adjusting The Microphone Sensitivity; Switching Between Mono And Stereo Mode - Sennheiser HME 95 - 05-10 Instruction Manual

8
Connect the audio cable to the 3.5 mm jack socket
the operating control and to the corresponding jack
socket on your audio player.
Audio from the additional audio source and from the
intercom are heard simultaneously through the headset.

Adjusting the microphone sensitivity

The microphone sensitivity has been factory pre-set to
80 mV/Pa as per RTCA DO-214.
To change the input sensitivity of the microphone:
Use a suitable slotted screwdriver.
Turn the microphone sensitivity control

Switching between mono and stereo mode

The mono/stereo switch
mono and stereo mode, depending on the intercom system.
Set the mono/stereo switch
– mono
– stereo
as shown.
allows you to switch between
to the desired position:
on