This easy to install Bluetooth “triple play” kit is essential to keeping your Fig. 1 American classic as stock possible. The A2DIY-C5 module sounds great for mobile conversations, streaming music, AUX playback and more. The included media remote is used to adjust device volume, pause/play tracks and easily mounts to steering wheel or dashboard and essential to reducing driver distraction.
Page 3
7. Secure microphone (See Fig. 5) to visor or headliner using included visor clips (See Fig. 6) Fig. 6 Fig. 5 Visor clip Microphone Fig. 2 8. Route microphone (See Fig. 5) down pillar, under driver kick panel and installation harness across to radio cavity.
Page 4
2. Insert cable through hole created in step 1 Optional charging kit 3. On module installation harness locate charger Fig. 11) 4. Connect cable from step 2 to charger USB type C- port With optional USB-type C charging” kit –smart devices remain charged while on the road.
Bracket Mount Media remote control (No drilling) The included media remote is used to control select Bluetooth functions without having Locate a flat surface at location of choice within 3.2 ft. of module and to fumble with smart device while driving, however; most functions can also be mount support bracket (See Fig.
Once paired, users may perform the following functions on iOS devices with Bluetooth 3.0 and later and Android 4.0 or later. This process must be carried out upon initial install after which the A2DIY-C5 Remote control functions do not apply to the Corvette radio, Remote can also be automatically reconnect with last paired device upon entering vehicle.
2. Press “AUX” button on radio Note: If AUX button does not function, rest radio by disconnecting 20- Modules A2DIY-C5CD A2DIY-C5 pin harness, or car battery for 2-5 minutes. After reconnections AUX Retains changer playback button should now function. Requires working CD changer...
Need help?
Do you have a question about the A2DIY-C5 and is the answer not in the manual?
Questions and answers