Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for thomann Harley Benton TUBE30 Head
Summary of Contents for thomann Harley Benton TUBE30 Head
- Page 1 TUBE30 Head Guitar Amp Head...
- Page 2 Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 08.02.2024, ID: 552998 (V2)
-
Page 3: Table Of Contents
Table of contents Table of contents General information..........................5 1.1 Symbols and signal words....................... 5 Safety instructions............................. 7 Features............................... 10 Installation and starting up........................ 11 Connections and operating elements................... 12 Technical specifications........................16 Plug and connection assignment....................18 Protecting the environment......................20 TUBE30 Head Guitar Amp Head... - Page 4 TUBE30 Head Guitar Amp Head...
-
Page 5: General Information
Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. 1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document. - Page 6 General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
-
Page 7: Safety Instructions
Safety instructions Safety instructions Intended use This device is intended to be used for the amplification of signals from musical instruments with electromagnetic pickups. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. - Page 8 Safety instructions DANGER! Danger to life due to electric current! A short circuit could lead to a fire hazard and risk of death. Do not modify the mains cable or the plug! In case of isolation damage, disconnect immediately the power supply and arrange repair. If in doubt, seek advice from a qualified electrician. WARNING! Possible hearing damage due to high volumes on speakers! With loudspeakers connected, the device can produce volume levels that may cause temporary or permanent hearing impairment.
- Page 9 Safety instructions NOTICE! Damage to the device due to high voltages! The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess vol‐ tages can also cause a risk of injury and fires. Make sure that the voltage specification on the device matches the local power grid before plugging in the device.
-
Page 10: Features
Features Features Output power: 30 watt at 8 Ω Footswitch connector (not included) Outputs for external speaker cabinet Reverb effect Further connections: Effects loop Preamp tubes: 3 × ECC83/12AX7 Power amplifier tubes: 4 × EL84 Class A power amplifier TUBE30 Head Guitar Amp Head... -
Page 11: Installation And Starting Up
Installation and starting up Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. -
Page 12: Connections And Operating Elements
Connections and operating elements Connections and operating elements Front ö & 1 [INPUT] | 6.35-mm (1/4”) jack socket to connect an instrument. [LO] stands for low gain. The signal is attenuated by 50% from [HI]. 2 [CLEAN VOLUME] | Volume control for the clean channel 3 [BRIGHT] | Switch for tone control of the high and centre frequencies 4 [GAIN] | Control to adjust amplification 5 [OVERDRIVE VOLUME] | Volume control for the distorted channel... - Page 13 Connections and operating elements 7 [BASS] | Bass control [MIDDLE] | Middle control [TREBLE] | Treble control 8 [REVERB] | Reverb control 9 [TONE] | Tone control 10 [STANDBY] | Switch for keeping the tubes warm 11 [POWER] | Main switch with status LED (lights when the device is on) TUBE30 Head Guitar Amp Head...
- Page 14 Connections and operating elements Back 12 Power cord 13 Fuse 14 HT fuse 15 [EFFECTS LOOP: SEND/LINE OUT] | Connection socket for input for effects device 16 [BYPASS] | Switch for bypass if no effects device is in use. The effects device can also be operated with 0 dB (750 mV) or -10 dB (250 mV).
- Page 15 Connections and operating elements 20 [4 OHM | 8 OHM] | Impedance switch 21 [LOUDSPEAKERS: 8-16 OHM] | External loudspeaker socket TUBE30 Head Guitar Amp Head...
-
Page 16: Technical Specifications
Technical specifications Technical specifications Amp class Class-A Input connections Instrument LO 6.35-mm (1/4”) jack socket Instrument HI 6.35-mm (1/4”) jack socket Effects device 6.35-mm (1/4”) jack socket Optional footswitch 6.35-mm (1/4”) jack socket Internal speaker (min. impedance 4 Ω 6.35-mm (1/4”) jack socket Output connections External speaker (min. - Page 17 Technical specifications Fuse T630 mA L250V in power plug socket HT fuse: T315 mA L250V Dimensions (W × H × D) 510 mm × 230 mm × 247 mm Weight 8 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing) Further information Channels...
-
Page 18: Plug And Connection Assignment
Plug and connection assignment Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured. Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short circuit or ‘just’... - Page 19 Plug and connection assignment 1/4" TS phone plug (mono, unbalanced) Signal Ground, shielding 1/4" TRS phone plug (mono, bal‐ anced) Signal (in phase, +) Signal (out of phase, –) Ground TUBE30 Head Guitar Amp Head...
-
Page 20: Protecting The Environment
Protecting the environment Protecting the environment Disposal of the packing material Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner. Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. - Page 21 Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal. You can return your old device to Thomann GmbH at no charge. Check the current conditions on www.thomann.de. If your old device contains personal data, delete those data before disposing of it.
- Page 22 Notes TUBE30 Head Guitar Amp Head...
- Page 24 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...
Need help?
Do you have a question about the Harley Benton TUBE30 Head and is the answer not in the manual?
Questions and answers