Status Display - Sennheiser EM 3731 Instructions For Use Manual

Indications and displays
RF
A B
300
PEAK
100
30
10
V
AF Peak
M
790.800
H
z
NAME
790.800
03.03
10
Audio level display "Dev"
The audio level display "Dev"
transmitter.
% DEV
When the transmitter's audio input level is excessively high, the receiver's
100
audio level display "Dev"
50
10
When the transmitter is overmodulated frequently or for an extended
period of time, the text "AF Peak" appears and the warning triangle for
indicating error states

Status display

The status shows the receiving frequency, the transmitter battery status
and – depending on the selection made in the "Display" menu – either the
frequency bank and the channel number or the name of the receiver. With
the EM 3732 Command receiver, the command display can also be
displayed within the status display. The contents of the status display can
be changed in the "Display" menu (see page 36).
When pressing the jog dial
opeerating menu (see "Working with the operating menu" on page 23).
When in the operating menu, you can return to the status display by
pressing the esc
Frequency display
The frequency display
M
H
z
Display for the current frequency bank and channel or the name
The display for the current frequency bank and channel or the name
BANK
shows – depending on the selection made in the "Display" menu – the
CH
following:
Frequency bank "1 ... 6, U" and channel number "1 ... 60"
Name
shows the modulation of the received
shows more than 100 %.
5
lights up red.
7
, the status display is replaced by the
6
button one or several times.
shows the current receiving frequency in MHz.