Sennheiser EK 100 - 01-09 Instruction Manual page 18

Via the "Tune" menu item, you can set a receiving frequency to be stored
in the current channel
frequency bank "U" and assign this channel a receiving frequency.
Setting a receiving frequency for the current channel
Press the rocker button until the "Tune" menu item appears.
SET
Press the
The MHz section of the receiving frequency of the channel is
highlighted.
Advanced Menu
Tune
823.925 MHz
Call up "Tune"
(special function)
It is vital to observe the notes on frequency selection on page 19.
Press the rocker button to set the MHz section of the
frequency.
SET
Press the
frequency.
The kHz section of the frequency is highlighted.
Press the rocker button to set the kHz section of the frequency.
SET
Press the
"Stored" appears on the display panel. The "Tune" menu item
appears again.
Selecting a channel and assigning this channel a frequency
Press the rocker button until the "Tune" menu item appears.
SET
Press the
bank is highlighted.
Advanced Menu
Tune
823.925 MHz
Call up "Tune"
(special function)
Press the rocker button to set the channel.
SET Press the
The frequency (MHz section) is highlighted.
Set the desired frequency (MHz and kHz section) as described in the
previous chapter.
Adjusting settings via the operating menu
or you can select a different channel in the
SET button.
SET
Tu n e
823.925 MHz
B.Ch: U1. 1
Select the frequency
bank and confirm
"Stored"
SET button to confirm the MHz section of the
SET button to confirm the frequency.
SET button and keep it pressed until the frequency
SET
Tu n e
823.925 MHz
B.Ch: U1. 1
Select the frequency
bank and confirm
"Stored"
SET button to confirm the channel.
SET
Tu n e
823.925 MHz
B.Ch: U1. 1
Select the channel;
store the setting
SET
SET
Tu n e
823.925 MHz
B.Ch: U5.
Select the channel;
store the setting
SET
1
17