Sennheiser EK 100 - 01-09 Instruction Manual page 16

If the squelch threshold is set to "High", the transmission range
will be reduced under unfavourable reception conditions.
The squelch should only be switched off for servicing purposes. With the
squelch threshold set to "Low", you switch the squelch off by keeping the
DOWN rocker button pressed for 3 seconds.
Display
823.925
ew100 G3
P
P
MUTE
RF AF
823.925
ew100 G3
P
RF AF
If you have accidentally switched off the squelch:
Press the UP rocker button to switch the squelch on.
Scanning for, releasing and selecting frequency presets –
"Easy Setup"
Menu item Function of the menu item
Reset List Releases all locked frequency presets
Current List Selects an unused frequency preset
Scan New List Automatically scans for unused receiving frequencies
(frequency preset scan). If receiving frequencies are used,
they will be locked; if receiving frequencies are unused,
they will be released. After the frequency preset scan,
you can select an unused frequency preset.
Selecting the frequency bank and the channel –
"Frequency Preset"
Menu
Frequency Preset
B.Ch: 1. 1
Call up "Frequency
Preset"
When setting up multi-channel systems, please observe the
following:
Only the factory-preset receiving frequencies within one
frequency bank ("1" to "20") are intermodulation-free. It is vital
to observe the notes on frequency selection on page 19.
Overview of the frequency banks and channels:
Frequency bank
"1" to "20"
"U"
Adjusting settings via the operating menu
Squelch is ...
... switched on.
MHz
The dotted line
threshold.
... switched off.
MHz
The dotted line
level display "AF" shows full deflection
(hissing noise).
SET
Frequency Preset
B.Ch: 1. 1
823.925MHz
Select the frequency
bank and confirm
"Stored"
Channels
up to 12 per
frequency bank
up to 12
displays the squelch
goes off and the audio
SET
Frequency Preset
B.Ch:
Select the channel;
store the setting
Type
System bank:
frequencies are factory-preset
User bank:
frequencies are freely selectable
2. 2
823.925MHz
SET
15