Advertisement
Active Indicator with Cylinder Retrofi t Kit
PE80 Series Exit Devices
Installation Instructions
7
Place dogging cam in carrier hole.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in part without the express written permission of ASSA ABLOY Access
and Egress Hardware Group, Inc. is prohibited.
8
Dogging
cam
Carrier
Place dogging spring outside of dogging slope.
Insert both on the carrier. Install four #6 screws.
Dogging slope
4
Dogging spring
#6 Screws
Carrier
FM803 12/23
Advertisement
Need help?
Do you have a question about the Corbin Russwin PED Series and is the answer not in the manual?
Questions and answers