Cleaning The Devices - Sennheiser 100-P G3 Instruction Manual

Cleaning the devices

CAUTION!
CAUTION!
28
Cleaning the devices
Liquids can damage the electronics of the devices!
Liquids entering the housing of the devices can cause a short-circuit and damage the
electronics.
Keep all liquids away from the devices.
Use a cloth to clean the devices from time to time. Do not use any solvents or cleansing
agents.
SKM 100 G3
To clean the radio microphone's sound inlet basket:
Unscrew the upper sound inlet basket from the microphone head by turning it counter-
clockwise.
Liquids can damage the microphone head!
Liquids can damage the microphone head.
Only clean the upper sound inlet basket.
Remove the foam insert.
There are two ways to clean the sound inlet basket:
– Use a cloth to clean the upper sound inlet basket from the inside and outside
– or scrub with a brush and rinse with clear water.
If necessary, clean the foam insert with a mild detergent or replace the foam insert.
Dry the upper sound inlet basket.
Dry the foam insert.
Reinsert the foam insert.
Replace the sound inlet basket on the microphone head and screw it tight.
You should also clean the contact rings of the microphone head from time to time:
Wipe the contact rings of the microphone head with a cloth.