Basic Playback For D.s.c - THOMSON VMD10 User Manual

48
EN
Play (4/6)
Button
Fast-Forward (3)
Button
[For Normal Playback]
To display the next image
10 / 24
11 / 24
12 / 24
13 / 24
To display the
previous
image
Power Switch
Lock Button
Stop (5)
Button
Rewind (2) Button
[For Auto Playback]
Display
100 – 0010
100 – 0011
100 – 0012
100 – 0013
Directory and File names
Displays the directory and file names (
Total number of images
Displays the total number of stored images.
Image number
Displays the index number of the image file (
PLAYBACK
Normal Playback
Images shot with the camcorder are automatically
numbered, then stored in numerical order in the
MultiMediaCard. You can view the stored images, one at a
time, much like flipping through a photo album.
1
Load a MultiMediaCard (
2
Set the Power Switch to "
down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.
•A stored image is displayed.
3
Press 3 to display the next image.
Press 2 to display the previous image.
Auto Playback
You can run through all the images stored in memory
automatically.
1
Perform steps 1 and 2 above.
2
Press 4/6.
•If you press 2 during Auto Playback, images are
displayed in descending order.
•If you press 3 during Auto Playback, images are
displayed in ascending order.
3
To end Auto Playback, press 5.
NOTE:
Even if you shoot a new image after playing back a low-
numbered one, this will not overwrite an existing image,
because new images are automatically stored after the last-
recorded one.
pg. 49).

Basic Playback For D.S.C.

pg. 12).
" while pressing
pg. 49).