THOMSON VMD10 User Manual page 63

Connection To A Personal
Computer
This camcorder can transfer still images to a PC by
using the provided software when connected as
shown in the illustration. It is also possible to transfer
still images to a PC with a DV connector-equipped
capture board installed.
1
Make sure the camcorder and PC are turned off.
2
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3
Turn the camcorder's Power Switch to "
while pressing down the Lock Button located on
the switch and turn on the PC.
NOTES:
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack ( pg. 7).
Never connect the PC connection cable and the
DV cable simultaneously to the camcorder.
Connect only the cable you wish to use to the
camcorder.
The date/time information cannot be captured into
the PC.
Refer to the instruction manuals of the provided
Software.
Also refer to the manufacturer's instruction manual
for the DV connector-equipped capture board.
When using a DV cable, be sure it has a core filter
attached. The core filter reduces interference.
"
61
EN