Page 1
User guide Protective Silicone Case Version 0.1 08/19...
Page 2
Welcome! This guide will get you up and running with your Protective Silicone Case for the igloohome Smart Padlock. In the meantime, you should follow igloohome on Facebook and Youtube! Like us on Facebook Visit our Youtube...
What’s included 2 Shackle Caps 1 Protective Silicone Case Torx Cap Battery Cover Please ensure battery is inserted into the Padlock and Torx cap is in locked position with the battery cover closed before putting on the Silicone Case.
Page 4
Retained Shackle Configuration Unlock the Padlock and pull the shackle to Fold the silicon case inside out to prepare open position. for setup Insert the case through the shackle. Loop the case through the shackle.
Page 5
Rotate the case so the orientation is correct. Pull and fold the silicon case down to ensure Loop the Silicon caps into the shackle with the it covers the whole padlock. correct orientation...
Page 6
Adjust the Silicon caps so it fits firmly without Push in the shackle into the padlock gaps between shackle caps & case onto the case shackle hole...
Page 7
Removable Shackle Configuration Fold the silicon case inside out to prepare Unlock padlock and remove the shackle for setup Fold the silicon case down to ensure it Insert the case from the top of the padlock covers the whole padlock...
Page 8
Loop the Silicon caps into the shackle Insert the shackle into the padlock with the correct orientation Adjust the Silicon caps so it fits firmly without gaps between shackle caps & case onto the case shackle hole...
Page 9
For enquiries go to: igloohome.co/support...
Need help?
Do you have a question about the 397069 and is the answer not in the manual?
Questions and answers