Connect The Power Cable - HOMCOM 370-301V70 Assembly Instruction Manual

4.Connect the power cable

Unscrew the bolts on the seat cushion, open the seat cushion, and according to the
diagram, plug the terminals of the power connection cable into each other.
5.Install the armrest assembly
First, remove the screws from the backrest. Then, pry the armrest supports outward.
With one hand, pull the backrest support outward and hold it firmly in place. Next,
align the armrest assembly with the screw posts on the backrest and snap it into
place. After it's snapped in, first slide the backrest support into the screw posts, then
snap the armrest support into the screw posts, and secure with screws.
G
H
J
J
J