Powering The Player - THOMSON DTH616 Manual

Powering the player

by using the battery
Installing the battery
The battery has three plugs that must be engaged in the three holes situated under the DVD
player.
Charging the battery
Removing the battery
Note: Do not to leave the battery attached when the player is not in use as the battery will run down quite
quickly if it is left attached with the player in standby mode.
by using the adapter
Connections and Setup
1.
Lay the battery flat as indicated in the drawing
opposite.
2.
Install the player over the battery while taking care
that the plugs on the battery engage into the holes
situated under the player.
3. Slide the player backwards until you hear it click into
place.
Plug the appropriate plug of the
adapter into the DC IN socket of the
battery.A red light comes on. It goes
green when the battery is charged.
To detach the player from the battery, press on the
arrowed button situated behind the battery, and then slide
the player forwards.
1.
2.
3
Plug the appropriate plug of the
adapter into the DC IN socket of
the DVD player.
Plug the adapter into a mains
socket.
EN