Powering The Player; By Using The Battery; By Using The Adapter - THOMSON DTH616 - annexe 1 Manual

Powering the player

by using the battery

Installing the battery
Charging the battery
Removing the battery
1.
Slide the battery lock on the left side of the player to the OPEN position to open the battery
compartment.The door opens.
2.
Press the battery release tab located on the right side of the battery compartment to the
right. Pull out the battery.

by using the adapter

Connections and Setup
1.
Slide the battery lock on the left side of the player to
the OPEN position to open the battery
compartment.The door opens. Lay the battery flat as
indicated in the drawing opposite.
2. Install the battery into the compartment with the
label facing up and the arrow pointing toward the
player. Push it all the way until you hear it click into
place.
3.
Slide the battery lock to the right to close the
compartment door.
Plug the appropriate plug of the
adapter into the DC IN socket of the
player.The battery takes about 3
hours to fully charge when the player
is switched off and a little longer if
the player is on.
1.
Plug the appropriate plug of the adapter into the DC
IN socket of the DVD player.
2.
Plug the adapter into a mains socket.
3
EN