Powering The Player; By Using The Battery; By Using The Adapter - THOMSON DTH615 - annexe 1 Manual

Powering the player

by using the battery

Installing the battery
The battery has three plugs that must be engaged in the three holes situated under the DVD player.
Charging the battery
Removing the battery

by using the adapter

1.
Lay the battery flat as indicated in the drawing
opposite.
Clic!
2.
Install the player over the battery while taking care
that the plugs on the battery engage into the holes
situated under the player.
3.
Slide the player backwards until you hear it click into
place.
To detach the player from the battery, press on the
arrowed button situated behind the battery, and then slide
the player forwards.
Connections and Setup
Switch off the DVD player.
Plug the appropriate plug of the
adapter into the DC IN socket of the
battery.The light CHARGE comes
on.The light FULL comes on when
the battery is charged.
1.
Plug the appropriate plug of the
adapter into the DC IN socket of
the DVD player.
2.
Plug the adapter into a mains
socket.
3
EN