Mockett PCS36B2S/UC-U Manual

!
Do NOT remove tape!
For indoor use only.
For use on a normally dry work surface.
If any malfunction occurs, do not attempt to disassemble or
repair.
Avoid placing the unit in a high temperature environment or
near fire.
Avoid liquid spills into outlet.
Do not insert foreign objects into the socket.
Allow enough clearance for part operation.
SPECIFICATIONS
6 ft. cord length.
Table thickness is 3/4" MIN. to 1-11/16" MAX.
Plug dimension is 1-11/32" X 1-1/32" X 7/8".
USB-A and USB-C ports are for charging use only.
Please use applicable adapter from data tree.(PLEASE SEE
DATA TREE PAGE FOR MORE INFORMATION.)
1
4"
Determine the position and location of the unit on the work
surface. Cut the hole at 16-1/4" X 4". Place and allow
enough clearance for unit operation. DO NOT place unit
where the cables are strained or trapped.
2024.02.05
WARNING
!
3-23/32"
2X
7/8" X 1-1/2"
OPENING
FRONT VIEW
16-1/4"
16-1/2"
16-5/32"
(16-1/4" CUTOUT)
2
Place the metal clips near the front and back of each side of
the unit. (NOTE: Metal clips are for use in hard surface
material only as an optional mounting means.)
1
TABLE OF CONTENTS
. . . . . . . . . . 1X PCS36B2S/UC-U
. . . . . . . . . . . .2X Wire Manager
. . . . . . . . . . . . .4X Metal Clips
. . . . . . . . . . . .4X Wing Clamp
4-7/16"
3/32"
3-15/16"
(4" CUTOUT)
SIDE VIEW
PCS36B2S/UC-U
1-3/16"
Metal clip