Switching On/Off; Selection Of Audio/Video Source - THOMSON DPL950 - RECEIVER User Manual

DPL950-EN receiver new 5/7/03
Switching on /off
• To switch on the receiver, press POWER/ECO button on
the receiver once to enter standby mode. Press SOURCE
button on the receiver or one of the source buttons or
ON/OFF on the remote control to power on the receiver.
(See illustration below)
BAND/APP
RANDOM
POWER
BAND/APP SOURCE
BASS/TREBLE
RANDOM SURROUND
• Standby: when the receiver is on, press the
ON/OFF on the remote to return to standby mode.
• To switch off the unit completely, press the POWER/ECO
button on the receiver.
NOTE
Your receiver has a back up memory to keep your
settings like preset radio station for about 2 weeks
in case electricity cut occurs. If the receiver is
unplugged for more than 2 weeks, all the settings
will be lost and re-setting will be necessary.
10:35 AM Page 17
theater modes
OPEN/CLOSE info
stereo delay
dvd
tv
tuner up
digital level
tape
sat/cab
video
tuner / vcr
theater modes
OPEN/CLOSE
info
R
delay
stereo
tv dvd
tuner up
level
digital
tape sat/cab
video
tuner / vcr
Operating Your Receiver

Selection of Audio/Video source

When one of the audio/video source is selected, the audio
and video input corresponding to the name will be
activated.
The receiver acts as a switching device between all the
sources that are plugged into it.
BAND/APP SOURCE
BASS/TREBLE R
RANDOM SURROUND
Example 1:
If you connect a VCR player to the VCR input (audio +
video) on the receiver and press the SOURCE button
until VCR shows on the display. You will be able to have
the sound and image transmitted by the VCR.
BAND/APP SOURCE
BASS/TREBLE R
RANDOM SURROUND
EN
theater modes
OPEN/CLOSE info
stereo delay
tv dvd
tuner up level
digital
tape sat/cab
video
tuner / vcr
stereo delay
dvd
tv
tuner up level
digital
tape
sat/cab
video
tuner / vcr
RDS
pty
hifi
dvd /cd
tuner down
13