Summary of Contents for THOMSON DPL915VD - MUSICMATCH SOFTWARE
Page 1
• Use .mp3 as the extension when converting audio files into MP3 for saving onto CD-R(W) or CD-ROM, e.g. Rocky08.mp3. Do not use any other extension e.g. .doc, .pdf. • Do not use the .mp3 extension for other text or non-audio data files as this may result in serious malfunction and harmful noise interference.
Page 2
Thomson multimedia 46/47 quai A. Le Gallo 92648 Boulogne Cedex FRANCE RCS nanterre B322 019 464 55334910 www.thomson-multimedia.com...
(RC800D) Unpacking The Speakers • 6 speaker cables including: • one set of speakers including 1 set of left and right front speakers, 1 centre speaker, 1 subwoofer and 1 set of left and right rear speakers. 2 X red/black cable...
+ and - signs on the battery compartment. • Place the receiver near the top shelf of the stand so heated air rising from it will not affect other components. 3. Press to close the cover.
S-video provides the best connection for the video portion of the signal. When connecting S-video cable, a Composite video cable (yellow RCA connector) must also be used. If you use a S-video cable to connect any audio-visual components to your DVD receiver, you must also use a S-video cable between your TV and receiver.
Getting Started Digital Connections Connecting the Antennas If you have a SAT receiver DVD player or CD player with a digital output, you can make use of an optical digital con- Manufactured under licence from Dolby Laboratories. "Dolby", "Pro Logic 2" and the double-D symbol are...
Subwoofer will increase bass response. Connect the subwoofer with the speaker wire (brown/ black) provided. If you want to enjoy full range of sound effects, it is a must to use the subwoofer with the speakers to maintain a dequate bass signal.
Placing the left and right speakers to form a 45-degree angle with your favorite viewing position will duplicate the Speakers placed less than two feet from the TV set must be soundtrack mixer's perspective. magnetically shielded in order to prevent picture distor- tion.
If possible, place surround speakers to either side of the lis- Rear wall tening area, not behind it. If rear wall mounting is the only choice, aim the speakers at each other (A), towards the front (B) or even towards the sidewalls (C, D). Experiment with placement until surround sounds seem to envelop you, rather than coming from behind you.
Even though you adjust the surround channel to be as loud You can always restore all settings back to its original state. as the others on the test signal, you'll find that on actual When the receiver is in STANDBY mode, press accordingly...
To stop DVD/CD playback. Press to eject disc tray. • To go to the next preset memory location in tuner mode. • To skip to the next track in CD mode and the next chapter in 13. Display DVD mode (only while playing).
To adjust the volume. 10. pr + / pr - To select programmed stations in TUNER mode. To skip to the next or previous chapter or track in DVD, CD & MP3 mode. 11. MUTE To mute all audio outputs.
PROG. Pro Logic II • Program mode is activated. • Audio output is in Dolby PL II Movie, Dolby PL II Music or Dolby Prologic mode. • Tuner stereo signal detected. • Audio output is in dts mode (for DVD, SAT/CAB and CD...
• Standby: when the receiver is on, press ON/OFF on the Example 1: remote twice (except in Tuner mode) to return to standby If you connect a VCR player to the VCR input (audio + mode. video) on the receiver and press the SOURCE button until VCR1/ANL shows on the display.
- VCR VCR IN (audio / video) - TV TV SCART (audio / video) When a source is selected, the source name will be shown on the display. Example: Press VCR to select VCR as the source to the amplifier.
Dolby Surround. Dolby Pro Logic II and Dolby 3 Stereo The Pro Logic II mode uses the built-in circuit to steer the This unit is equipped with Dolby Digital 5.1-channel so Left, Center, Right and Surround left and right channel that you can enjoy enhanced full digital surround sound.
The receiver defaults to the most convenient settings for the front speakers. your easiest use (see table). By default, SAT (satellite) is set to analog input. If you wish DSP (Digital Sound Processor) to change the input formats, follow the steps below: These digital sound effects resemble sounds in a real 1.
Advanced Sound Control Auto Switching Advanced Setting If the TV is connected to the system via a SCART cable, the TV will automatically switch to the right input when the receiver is powered on. Factory Default Setting For example: The receiver speaker distance default settings are the...
Page 22
PRESET Subwoofer Present 2. While the Display is showing FRNT 4.5m, press PRESET + or PRESET - on the main unit or LEFT or RIGHT arrow on Displaying Program Formats the remote control to adjust the delay setting. When a digital source is playing, the receiver will automati-...