Shark MATRIX PRO UR2360S Owner's Manual page 10

MAINTENANCE
CAUTION: Turn off power before performing any maintenance. To turn the
robot power off, press the DOCK button on the robot for 5-7 seconds.
EMPTYING THE ROBOT DUST BIN
Press the Dust Bin Release Button and slide out the
dust bin.
Empty debris and dust into trash. If desired, you
may use a damp cloth to wipe the dust bin. Let dry
for 24 hours before use.
NOTE: After emptying the dust bin make sure to insert
the dust bin completely, until it clicks into place.
s h a r kc l e a n . c o m
To open the dust bin lid, pinch and lift up using the
finger slots.
MAINTENANCE
CLEANING THE ROBOT'S FILTER
For optimal suction power, after each use, clean the filter inside the robot's dust bin.
Remove and empty the dust bin. Clean any hair or
debris off the on the back of the dust bin.
Every time you empty the dust bin, lightly tap dust
and dirt off the filter, then use a dry cloth or soft
brush to remove any remaining debris.
s h a r kc l e a n . c o m