Installing The Bagger Top - Toro 316000001 Operator's Manual

6

Installing the Bagger Top

Parts needed for this procedure:
2 Grass Bag
1 Upper bagger tube
Procedure
1. Install the bagger top to the bagger frame.
2. Rotate the bagger top to align the key holes in
the bagger top brackets with the keys in the
posts on the bagger frame
3. Slide the brackets over the posts and rotate the
bagger top down to the operating position.
Note:
The bagger top is easier to install if 2
people work together.
Figure 21
1. Bagger top
2. Bagger frame
3. Key hole
(Figure 21).
g014888
4. Bagger top bracket
5. Key
6. Post
4. Lift the bagger top and install the bags by sliding
the bag frame hooks onto the retaining brackets
(Figure 22).
1. Bag
2. Bagger frame
5. Lower the bagger top onto the bags
6. Install the upper bagger tube by inserting the
curved end into the opening in the bagger top.
Note:
Ensure that the flared end with the
retention post is pointing down and froward in
preparation to be mated with the Finishing Kit.
12
Figure 22
3. Retaining bracket
4. Bag frame hook
(Figure
Figure 23
g005672
23).
g033030