Midea MRT14D2BST User Manual page 21

Problem
• Remove foreign matters on the door seal
Door seal fails to be
tight
• Heat the door seal and then cool it for restoration (or blow it
with an electrical drier or use a hot towel for heating)
• There is too much food in the chamber or food stored
contains too much water,resulting in heavy defrosting
Water pan overflows
• The doors are not closed properly, resulting in frosting due to
entry of air and increased water due to defrosting
• Heat dissipation of the built-in condenser via the housing,
which is normal when housing becomes hot due to high
Hot housing ambient temperature, storage of too much food or shutdown
of the compressor is shut down, provide sound ventilation to
facilitate heat dissipation
• Condensation on the exterior surface and door seals of the
Surface
refrigerator is normal when the ambient humidity is too high.
condensation
Just wipe the condensate with a clean towel
• Buzz: The compressor may produce buzzes during operation,
and the buzzes are loud particularly upon start or stop. This is
normal
Abnormal noise
• Creak: Refrigerant flowing inside of the appliance may
produce creak, which is normal
Possible reason
17
EN