Midea MRT14D2BST User Manual page 11

Cover plate
ATTENTION
Images show a refrigerator that opens on the left side. Your refrigerator may open on the
right side.
4. Put the refrigerator down, unscrew the lower hinge screw and adjusting foot, remove
the lower hinge, remove the lower hinge shaft and install it into the shaft hole on the
other side of the hinge.
5. Install the lower hinge and tighten the screws on the left side of the refrigerator,
install two adjusting feet, and erect the refrigerator.
Lower hinge
Adjusting foot
Screw
6. Unscrew and remove the shaft sleeves, stopper and right door self-locking screws
of the two door bodies, take out the left door self-locking from the accessory bag,
and install it to the left corner of the door body together with the stopper and shaft
sleeves. Take out the hole plug and shaft sleeve on the upper part of the refrigeration
door and adjust their positions before installing them into the door body. Take out
the shaft sleeve on the freezing door and install it on the other side.
Top hinge cover
Plug pins
07
Screw
Middle hinge
Remove the lower hinge, remove
the lower hinge shaft and install it
into the shaft hole on the other side
of the hinge
EN