signal strength
Use this feature to turn the TV speakers off when you connect an audio
system. (See "Connecting to an analog audio system" _.)
ENTER
•/V/_l/1_
This TV will allow you to view the digital signal meter for digital channels.
_,
EXIT/CANCEL
.................
U E N U
I turning
off the built-in speakers
1[ Checking
the Digital-signal
q
Press MENU in the TV mode. Then press • or
• to select "Audio",
then press • or ENTER.
MENU
SETUP
O
Press • or • to select "Speakers".
Then Press • or • to select "On" or "Off".
Press EXIT/CANCEL to return to the normal
screen.
Note:
EXIT/
CANCEL
©
• This function
can be used for 26LV610U
only.
• If "Off" is selected,
"Speaker
Off" will be displayed
on the
screen when the volume
is changed.
To turn on the built-in speakers:
Select "On" in step 2 above.
1
2
Press MENU in the TV mode, The TV menu
screen
will appear,
Press • or • to select
"Channel"
menu, then press • or ENTER,
MENU
SETUP
O
Press • or • to select "DTV Signal", then
press • or ENTER.
The Digital-Signal strength screen will appear.
If necessary, adjust the direction of the antenna
to obtain the maximum signal strength.
Press EXIT/CANCEL to return to the normal
screen.
Note:
EXIT/
CANCEL
©
Signal meter feature is not available
for analog channels.
After about 4 minutes,
Signal Meter screen will return to
normal TV-operation
automatically.
44
52G0101A P37-46.indd 44
'_¶_r_
1/5/09 3:04:53 PM