Selecting The Audio Language; Selecting The Hdmi Audio Input Source - Toshiba 19LV610U Owner's Manual

ecting the audio language/
Selecting the HDMI audio input source
When two or moreaudiolanguages are included in a digital signal, you can
select one of the audio language. (This function is available only for digital
broadcast.)
When you use PC AUDIO IN jacks with HDMI or DVI device, you must select
HDMI audio input source from "HDMr' or "DVI".
0-6
ENTER
•/v/_f/P,,"
EXIT/CANCEL
MENU
Press MENU in the TV mode. Then press • or
• to select "Audio", then press • or ENTER.
MENU
SETUP
O
Press • or • to select "Audio Language",
then press • or ENTER to display the Audio
Language menu.
Press A/• or Number buttons (0-6) to select
your desired language.
Cz>
CD (3D(Z)
Q Gb(Z)
(3D
After your desired setting, press EXIT/CANCEL
to return to the normal screen.
EXIT/
CANCEL
©
1
Press MENU in the HDMI1 mode (only for
26LV610U, the rest of the models are "HDMI
mode"). The TV menu screen will appear.
Press • or • to select "Audio", then press •
or ENTER.
MENU
SETUP
O
Press • or • to select"HDMI1Audio"(only
for 26LV610U, the rest of the models are
"HDMI Audio"). Then press < or • to select
"HDMI" or "DVI".
HDMI:
DVI:
When you connect the HDMI device to
the TV, select this setting.
When you connect the DVI device to the
TV with analog audio cords, select this
setting.
Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL
©
42
52G0101A P37-46.indd 42 '_¶_r_ 1/5/09 3:04:50 PM