Table of Contents
Advertisement
2.
CONTROLS
2.1. FRONT PANEL
Power On:
Release Catch:
Release Catch
11111111:=~
--
111111
:=
V.
. .
.......
ci..-... ---
111
I I
ii
-
Fig.
2.1. Front panel of the Graphics Recorder Type 2313
"On" /"Off" switch for mains power. When first set to "On", either
the Active or Entering LED at top-right corner of the instrument
should light, accompanied by a print out of date and time.
Press down and pull forward for access to the paper drive mech-
anism and recording paper. See section 3.3 for paper loading
.
Application Package:
Plug-in module determining the documentation and control functions
available with the
2313.
For use as a conventional alphanumeric print-
er and graphics recorder, the Application Package BZ 7000 is includ-
ed. See Chapter 1 for details on other Application Packages which
may be fitted.
At the top right of the 2313 are two rows of dual function pushkeys. These are shown
in Fig. 2.2 overleaf and when using Application Package BZ 7000 are reserved for en-
tering the date and time with the built-in clock of the Recorder (see section 3.5). With
the other Application Packages an individual Control Function Overlay is supplied
which clips between the catches on either side of the top-most row of pushkeys.
5
Advertisement
Table of Contents
