INTRODUCTION Thank you for purchasing the Tahiti™ Link. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient.
Support For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit ionaudio.com. For additional product support, visit ionaudio.com/support. ION Audio Tahiti™ Link User Guide...
Before attempting to move Tahiti™ Link, always remove the speaker from the pole mount first. Hold the top-most section of the pole with one hand and gently unscrew Tahiti™ Link until it is separated from the pole mount. ION Audio Tahiti™ Link User Guide...
WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry • place where they will not be a ected by water and cause a risk of electric shock. ION Audio Tahiti™ Link User Guide...
Link in Standby Mode to save battery by quickly pressing and releasing the Power button. To wake the unit, quickly press and release the Power button again, or use the the ION Sound Control™ app. ION Audio Tahiti™ Link User Guide...
Page 8
Here are some other recommendations for getting the longest life from the internal battery. General Usage Fully charge the battery before using it. Avoid full discharge of the battery if possible. Li-Ion batteries are maintenance-free, and the battery will last longest when operating between 30–80% charged.
Solid Red: Charging. If the unit is powered o , • the LED will turn o once charging is complete. Battery status can also be seen from the ION Sound Control™ app. Quickly press and release this button to enter or exit standby mode.
Rear Panel 4. USB-C® Port To charge Tahiti™ Link, connect the included USB-A to USB-C® charging cable from this port to a USB power adapter (DC 5V, 2A; not included) connected to a power outlet. ION Audio Tahiti™ Link User Guide...
Tahiti™ Link will be available to pair, so make sure your Bluetooth device is within range of the speaker, no more than 100 ft. (30.5 2. Navigate to your device’s Bluetooth setup screen, find TAHITI LINK, and connect.
1. Turn on one Tahiti™ Link by pressing and holding the Power button. This speaker will be your “primary” speaker. 2. Navigate to your device’s Bluetooth setup screen, find TAHITI LINK, and connect to the primary speaker. The Bluetooth LED will be lit solid blue.
Android OS or iOS on your device. Follow these steps to download the free app on your device: 1. Open the Apple App Store or Google Play on your device. Then, search for the ION Sound Control™ app. 2. Follow the on-screen instructions to download and install the app. Once downloaded, the ION Sound Control™...
If there is too much bass: Try adjusting the tone or EQ control on your sound source or on Tahiti™ Link via the ION Sound Control™ app to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
** Battery life may vary based on temperature, age, and volume usage of product. Trademarks & Licenses ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by ION Audio is under license.
Need help?
Do you have a question about the TAHITI LINK and is the answer not in the manual?
Questions and answers