Charging The Batteries - Makita VS001G Instruction Manual

Removal
While pinching inward on the grips of the hooks, remove
the side brush.
1
Fig.8
► 1 . Grips of hooks

Charging the batteries

Indicating the remaining battery
capacity
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Fig.9
► 1 . Indicator lamps 2. Check button
1
2
8 ENGLISH
Indicator lamps
Lighted Off
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
NOTE: The first (far left) indicator lamp will blink when
the battery protection system works.
Remaining battery capacity
indication (control panel)
You can also check the remaining battery capacity on
the control panel. The remaining battery capacity is dis-
played when the ON/OFF switch is turned on or off, or
when the check button is pressed. The battery indicator
lamps light up for 3 seconds.
Indicator lamps
On Off
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
Remaining
battery
capacity
Blinking
50% to 100%
20% to 50%
0% to 20%
Charge the
battery