Names Of Parts - Makita VS001G Instruction Manual

Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely dis-
charged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.

Names of parts

1
14
Fig.1
1 Handle
5 Suction button
9 Check button
13 Lamp
17 Main brush height
adjusting knob
21 Waste container shaft
25 Prefilter
4
5
6
2
15
16
18
17
28
24
25
26
2 Handle lock lever
6 Filter shake button
10 Indicator lamps
14 Grip
18 Rear wheel
22 Grip (waste container
part)
26 HEPA filter
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. When not using the battery cartridge, remove
it from the tool or the charger.
5. Charge the battery cartridge if you do not use
it for a long period (more than six months).
7
8
9 10
19
20
21
3 Control panel
7 Main brush button
11 Side brush ON/OFF
lever
15 Side brush
19 Front wheel
23 Waste container
27 Brush shaft
5 ENGLISH
3
11
12
22
23
4 ON/OFF switch
8 Lamp button
12 Side brush height adjust-
ing knob
16 Battery box cover
20 Main brushes
24 Battery box
28 Earthing line
13
27